Getting out the frames with a Kress Duo Saw

This is the first outing with the Kress Duo Saw- a fantastic tool

It will cut up to 200mm (7.5 inch). I am hopeful it will speed the job up and save on a bit of wood. Currently I rough cut the frame with a chainsaw and then bandsaw the approximate bevel and then tweak it with a plane.

First fit and looking good.

7 frames out of 21. Its going to be a long summer.

She's Launched

First Build 2

Seeing her being put together from his own design must have been a fantastic thrill. I wonder if he thought she would still be around after 73 years. 20 years in those days would have been considered a useful lifespan.

Stem Removal

The stem had to come out which is just a little daunting if you have never done it before. Probably the last job one would willingly tackle given a choice.

Lofting the stem from measurements taken of the stem while it was still in the boat.

 The first thing, before removal, was to take measurements of the profile and the shape of the rabbet and loft them on the bench to allow templates of the various parts to be cut out.


The drift bolts attaching the lower part of the stem to the keel were withdrawn by welding threaded rod to the head of the bolt which was then nutted on a cross beam which could then be jacked up with a couple of hydraulic jacks 

Drift Bolt removal using hydraulic jacks

Surprisingly (frighteningly) easy to remove.

The planks were easily sprung away from the stem and a saber saw was used to cut the remaining fastenings after which the thing just slid out. For this kind of work and removing frames a saber saw is a must with long flexible blades, fantastic. The saw was a cheap 50 Euro job an Einhell DIY machine but it lasted for all but two of the frames.

And now laying on the ground with all its horrors reveled.

There is definitely something missing!